steam frame stand
Prompt that made this
Desk stand for the Valve Steam Frame VR headset (about 175 × 95 × 110 mm with the facial interface): a round 140 mm base, a 260 mm upright post, and at the top a smooth saddle shaped like the crown of a head: a half ellipsoid 150 mm wide, 100 mm deep and 70 mm tall, dome up and flat underneath where it joins the post, built as one smooth curved surface with no facets or flat panels, that the headset's strap hangs over, lenses facing out. Two 25 mm pegs halfway up the post hold the controllers by their straps. Put the post height, saddle width and base diameter on parameters.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
The Steam Frame went on sale this autumn, and stands and mounts for it are still hard to find. The saddle, hooks and cups are sizes on the model, so if the fit is off you change a number, not the file.
The prompt under the model is the starting size. Fork it to move a wall, a hole, or a flag without spending a prompt.
How to print
PLA or PETG, 0.2 mm, 3 walls, 20% infill. Lay hooks so the layers run along the hook, not across it, or they snap at the bend.
Free tools for this STL
- STL volume and weight calculatorUpload an STL, 3MF, or OBJ and get its volume, surface area, size, and the filament weight and cost for PLA, PETG, ABS, and more.
- STL viewer onlineOpen STL files in your browser. Measure distances and holes, cut a section, check it is watertight, and see the print weight. No install, nothing uploaded.
- Convert STL to GLBFree STL to GLB converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the GLB.
- Convert STL to OBJFree STL to OBJ converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the OBJ.
Questions
- Can I change the size of this steam frame stand?
- Yes. Sign up free, fork the part, and scrub any size. Parameter edits do not spend a prompt.
- What file do I get?
- STL for the slicer and GLB in the browser. STEP is on Maker and Pro.
More to make
- LaserOpen
welcome sign
Wedding welcome sign
Wedding welcome sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
- CNCOpen
cnc router projects
CNC tool tray
CNC tool tray as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenCommunity
USB SSD stand
USB-C SSD stand: a 40 x 20 x 50 mm U-cradle tilted at 70° on a base, with a 12 mm slot and a cable notch in the back wall.
- LaserOpen
laser cut clock
Laser cut gear clock
Laser cut gear clock as a parametric cut file. Set the stock and size, then download the SVG or DXF.
- CNCOpen
cnc sign
CNC carved name sign
CNC carved name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenCommunity
Phone stand
Desk phone stand with a flat base, a backward-leaning backrest, a front lip that holds the phone's bottom edge, and an optional cable slot.