starlink mini pole mount
Prompt that made this
Pole mount for a Starlink Mini dish (298.5 × 259 × 38.5 mm): a cradle frame the dish drops into, with 3 mm lips over its front edge on all four sides and 1 mm clearance, open in the middle so the back of the dish stays clear. Across the back of the cradle runs one bracket, 60 mm tall and 8 mm thick, spanning the full width of the frame and fixed to both side rails at mid-height, so the load spreads over the whole frame. At the bracket's centre, behind the middle of the dish, sits a two-part clamp for a 40 mm round pole running vertically, 60 mm tall, closed by two M5 bolts and nuts. The cradle tilts 30° back from vertical about the clamp. Put the dish width, height and thickness, the pole diameter and the tilt angle on parameters.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
Starlink Mini mounts are sold for one pole, one rack or one angle. Here the dish size, the pole or crossbar and the tilt are sizes on the model: set them to your setup and download the STL.
The prompt under the model is the starting size. Fork it to move a wall, a hole, or a flag without spending a prompt.
How to print
PETG or ASA outdoors, 0.2 mm, 4 walls, 30% infill: PLA softens in the sun. Print one corner of the cradle first to check the dish fits.
Free tools for this STL
- STL volume and weight calculatorUpload an STL, 3MF, or OBJ and get its volume, surface area, size, and the filament weight and cost for PLA, PETG, ABS, and more.
- STL viewer onlineOpen STL files in your browser. Measure distances and holes, cut a section, check it is watertight, and see the print weight. No install, nothing uploaded.
- Convert STL to GLBFree STL to GLB converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the GLB.
- Convert STL to OBJFree STL to OBJ converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the OBJ.
Questions
- Can I change the size of this starlink mini pole mount?
- Yes. Sign up free, fork the part, and scrub any size. Parameter edits do not spend a prompt.
- What file do I get?
- STL for the slicer and GLB in the browser. STEP is on Maker and Pro.
More to make
ModelOpenCommunity
Sink sponge holder
Open-top sink sponge holder with 2 mm walls, a floor that slopes toward the front, five 5 mm drain slots, and two blind 30 mm suction-cup recesses on the bac…
ModelOpensteam frame stand
Steam Frame stand
Steam Frame stand as a parametric solid. Change a size, then download the STL.
LaserOpenplasma cut brackets
Plasma cut bracket set
Plasma cut bracket set as a parametric cut file. Set the stock and size, then download the SVG or DXF.
- CNCOpen
cnc charcuterie board
CNC charcuterie board
CNC charcuterie board as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenCommunity
Phone stand
Desktop phone stand on a shield-shaped base (wide rounded back, sweeping curved shoulders, pointed front tip) with a front lip, a backward-leaning backrest a…
LaserOpenpuzzle box
Laser cut puzzle box
Laser cut puzzle box as a parametric cut file. Set the stock and size, then download the SVG or DXF.