steam frame controller stand
Prompt that made this
Charging stand for the two Steam Frame controllers: a 160 × 90 mm base with two angled cups 45 mm across that hold the controllers grip down, side by side, and a channel under each cup for a USB-C cable. Put the cup diameter, cup angle and cup spacing on parameters.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending a prompt.
Why this one
The Steam Frame went on sale this autumn, and stands and mounts for it are still hard to find. The saddle, hooks and cups are sizes on the model, so if the fit is off you change a number, not the file.
The prompt under the model is the starting size. Fork it to move a wall, a hole, or a flag without spending a prompt.
How to print
PLA or PETG, 0.2 mm, 3 walls, 20% infill. Lay hooks so the layers run along the hook, not across it, or they snap at the bend.
Free tools for this STL
- STL volume and weight calculatorUpload an STL, 3MF, or OBJ and get its volume, surface area, size, and the filament weight and cost for PLA, PETG, ABS, and more.
- STL viewer onlineOpen STL files in your browser. Measure distances and holes, cut a section, check it is watertight, and see the print weight. No install, nothing uploaded.
- Convert STL to GLBFree STL to GLB converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the GLB.
- Convert STL to OBJFree STL to OBJ converter. Runs in your browser, so the file never leaves your computer. Preview the model, then download the OBJ.
Questions
- Can I change the size of this steam frame controller stand?
- Yes. Sign up free, fork the part, and scrub any size. Parameter edits do not spend a prompt.
- What file do I get?
- STL for the slicer and GLB in the browser. STEP is on Maker and Pro.
More to make
ModelOpenmultiboard tape holder
Multiboard tape holder
Multiboard tape holder as a parametric solid. Change a size, then download the STL.
ModelOpenCommunity
USB SSD stand
USB-C SSD stand: a 40 x 20 x 50 mm U-cradle tilted at 70° on a base, with a 12 mm slot and a cable notch in the back wall.
- CNCOpen
cnc router projects
CNC tool tray
CNC tool tray as a parametric cut file. Set the stock and size, then download the SVG or DXF.
- LaserOpen
welcome sign
Wedding welcome sign
Wedding welcome sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelOpenmultiboard spray can holder
Multiboard spray can holder
Multiboard spray can holder as a parametric solid. Change a size, then download the STL.
ModelOpenCommunity
A4 lightbox
Single-piece hollow lightbox with a top slot for an A4 cardboard sheet resting on full-height side lips, an integrated closed back, and a cable socket in the…