3D print
Prompt that made this
Socket organizer rail, 220 × 24 × 16 mm, twelve 3/8 in posts 12 mm tall labelled 10–21 mm, two 5 mm hang holes.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Wall or toolbox storage for 3/8 in drive sockets from 10 to 21 mm
Each socket slides over its post by its square drive hole and the rail hangs on screws through the end holes. The label recess below each post takes a sticker or marker for the socket size.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
CNCForkCNC cut
Chair - Rounded
A taller, sleeker flat-pack chair with tapered side frames and a backrest reclined at an angle: the front legs splay forward and narrow toward the foot, and…
ModelForkCommunity
Laptop stand
Two sloped 12 degree risers with front lips and a separate 220 mm spreader that slots into 4 mm mortises; three printed parts.
LaserForkplasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkcnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Steam Deck stand
Steam Deck stand: 110x80 base with a dovetail groove and a separate 128 mm wide yoke with an 18 mm slot leaning at 65 degrees and a 12 mm cable notch.
LaserForkLaser cut
Finger jointed desktop organizer
Finger-jointed desktop organizer with a front-open carcass, two tabbed shelves and three open-top drawers, each with a finger-pull slot.