Shop vac hose adapter

By Byteworks

Stepped tube adapter: a 60 mm long, 32 mm OD hose spigot, a 40 mm cone, then a 50 mm long socket with 58 mm inner diameter, 2.5 mm walls and a slight friction taper on each end.

Model
stl3mfstepobjglbbrep
Customize for free
Shop vac hose adapter, 3D printable model

Prompt that made this

Shop vac hose adapter: a stepped tube that connects a 32 mm hose to a 58 mm power tool dust port. A 60 mm long section with 32 mm outer diameter, a 40 mm long cone, then a 50 mm long section with 58 mm inner diameter. Walls 2.5 mm. A slight taper on each end for a friction fit.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Shop vacuum owners who need to connect a 32 mm hose to a power tool dust port with a 58 mm outside diameter.

The 32 mm OD spigot pushes into the hose; the power tool dust port pushes into the 58 mm ID socket. The cone carries airflow between the two sizes. Slight tapers at the hose tip and the socket mouth give a friction fit.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Magnetic parts tray, 3D printable modelModelFork

    Community

    Magnetic parts tray

    Open parts tray 120x80x15 with 2 mm walls and 8 mm rounded corners, with optional four 20 mm magnet pockets under the floor.

  • Bench dog, 3D printable modelModelFork

    Community

    Bench dog

    Round bench dog peg, 19.8 mm dia and 50 mm tall, with a 6 mm flange head whose top edge is chamfered, and a 2 mm spring slot cut up the side of the shaft.

  • Tape measure holster, 3D printable modelModelFork

    Community

    Tape measure holster

    Open-top holster with an 82x42x70 mm pocket for a 5 m tape measure and a back-mounted belt loop that takes a 40x4 mm belt.

  • Bambu poop chute bucket, 3D printable modelModelFork

    Community

    Bambu poop chute bucket

    Two-part waste chute: a hollow 70x40x35 chute with a 28x18 hooked inlet lip and dovetail rails underneath, plus a separate 90x70x80 bucket whose lid has matc…

  • PTFE tube clip, 3D printable modelModelFork

    Community

    PTFE tube clip

    Small PTFE tube clip block with a snap-in C-slot channel and a 6 mm screw hole.

  • Under desk headphone hook, 3D printable modelModelFork

    Community

    Under desk headphone hook

    Under-desk headphone hook: a C-clamp for 15-30 mm desk tops with a printed M10 screw and 20 mm knurled knob, and a 60 mm J-hook bolted to the clamp spine.

Browse creations