3D print
Prompt that made this
Parts tray, 120 × 80 × 15 mm, 2 mm walls, 8 mm corner radii. Optional four 20 mm magnet pockets under the floor.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Workshop or desk tray for sorting small parts, optionally holding itself to a steel surface or a magnetic base.
A rounded-rectangle shell with a solid floor holds the parts. Optional blind pockets in the underside of the floor take 20 mm disc magnets without opening into the cavity.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Modular 21700 battery cell spacer tile
Four staggered-honeycomb 21700 cell holder tiles laid out in a 2x2 lattice, each tile now 4 columns of 5 cells, with dovetail tabs on its right and top edges…
ModelForkCommunity
Parametric box with lid
Two-part storage box (100x70x50 inside, 1.6 mm walls) with a recessed 4 mm lid, optional snap hook and slot on the front long side, and optional two-knuckle…
ModelForkCommunity
Bambu poop chute bucket
Two-part waste chute: a hollow 70x40x35 chute with a 28x18 hooked inlet lip and dovetail rails underneath, plus a separate 90x70x80 bucket whose lid has matc…
ModelForkCommunity
Filament spool holder
Two open A-frame spool stands with 8.2 mm axle holes at 50 mm height, optional 608 bearing seats on the inner faces, and a separate 8 mm x 100 mm axle.
ModelForkCommunity
Printer purge bin
Open-top 100x70x60 purge bin with 1.2 mm walls and a rear J-hook with an 8 mm lip that hangs over a 6 mm rail or 2020 extrusion lip.
