IKEA Skådis plier holder

By Byteworks

IKEA Skådis plier holder: a 100 mm bar with five 12x8 mm slots, 8 mm deep on 18 mm pitch, cut into its open front face, on a 4 mm back plate with two drop-in pegs on 40 mm centres.

Model
stlstepglb
Customize for free
IKEA Skådis plier holder, 3D printable model

Prompt that made this

IKEA Skadis plier holder. Two pegs, a 100 mm bar with five 12 × 8 mm slots, 8 mm deep, 18 mm apart.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hanging pliers on an IKEA Skådis pegboard

Two J-pegs drop into the board slots and carry the load through the 4 mm back plate into the bar. Plier jaws or handles seat in the five slots cut into the bar's front face.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • IKEA Skådis phone holder, 3D printable modelModelFork

    Community

    IKEA Skådis phone holder

    IKEA Skådis pegboard phone holder with two hook pegs on 40 mm centres and a tilted 78 x 18 mm phone slot at 65 degrees with a 6 mm front lip and an 8 mm cabl…

  • IKEA Skadis tray, laser-cut designLaserFork

    Laser cut

    IKEA Skadis tray

    A boxy open tray whose two rectangular side walls are hooked brackets for an IKEA Skadis board, with finger-jointed bottom and front and a back wall between…

  • IKEA Skådis bin, 3D printable modelModelFork

    skadis bin

    IKEA Skadis bin

    A bin that hooks straight into your Skadis board with no clips. Three cells wide to start, 120 mm, with a curved front so you can reach in.

  • IKEA Skådis tablet holder, 3D printable modelModelFork

    Community

    IKEA Skådis tablet holder

    IKEA Skådis tablet holder: 4 hook pegs on an 80x40 pattern, a 180x18 slot open at the top of the cradle and tilted 70 degrees, a 10 mm front lip and a 12 mm…

  • IKEA Skådis bin, laser-cut designLaserFork

    Laser cut

    IKEA Skådis bin

    An open tray on two hooked side brackets that hang on an IKEA Skadis board, with a floor, a front wall and a back wall.

  • IKEA Skådis hook, 3D printable modelModelFork

    Community

    IKEA Skådis hook

    IKEA Skådis pegboard hook: two 5 mm pegs on 40 mm centres, a 4 mm back plate and a 12 mm wide J-hook projecting 35 mm, with an optional second hook 20 mm lower.

Browse creations