IKEA Skådis phone holder

By Byteworks

IKEA Skådis pegboard phone holder with two hook pegs on 40 mm centres and a tilted 78 x 18 mm phone slot at 65 degrees with a 6 mm front lip and an 8 mm cable slot in the bottom.

Model
stlstepglb
Customize for free
IKEA Skådis phone holder, 3D printable model

Prompt that made this

IKEA Skadis phone holder. Two pegs on 40 mm centres, a 78 × 18 mm slot at 65° so a phone in a case sits landscape or portrait, and a 8 mm cable slot in the bottom. Lip at the front 6 mm. 2.4 mm walls.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hang a phone in a case on an IKEA Skådis pegboard, in portrait or landscape, with a charge cable passing through the bottom.

The two hook pegs pass through Skadis slots and catch behind the 5 mm board. The load goes through the plate and wedge into the pegs. The phone rests on the tilted floor and 6 mm front lip and leans back against the tray back wall at 65 degrees from horizontal. The cable passes through the 8 mm slot in the floor.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • IKEA Skådis bin, laser-cut designLaserFork

    Laser cut

    IKEA Skådis bin

    An open tray on two hooked side brackets that hang on an IKEA Skadis board, with a floor, a front wall and a back wall.

  • IKEA Skådis cable hook, 3D printable modelModelFork

    Community

    IKEA Skådis cable hook

    IKEA Skådis pegboard cable hook with a 4 mm back plate, two drop-in pegs on 40 mm centres, and three 8 mm wide J-hooks in a vertical row 18 mm apart.

  • IKEA Skådis bin, 3D printable modelModelFork

    skadis bin

    IKEA Skadis bin

    A bin that hooks straight into your Skadis board with no clips. Three cells wide to start, 120 mm, with a curved front so you can reach in.

  • IKEA Skadis tray, laser-cut designLaserFork

    Laser cut

    IKEA Skadis tray

    A boxy open tray whose two rectangular side walls are hooked brackets for an IKEA Skadis board, with finger-jointed bottom and front and a back wall between…

  • IKEA Skådis shelf, 3D printable modelModelFork

    Community

    IKEA Skådis shelf

    IKEA Skådis pegboard shelf: 160x80x4 plate with two 5 mm mounting holes on 80 mm centres, a 16 mm rear riser, two drop-in J-pegs on 80 mm centres and an opti…

  • IKEA Skådis organizer tray with dividers, laser-cut designLaserFork

    Laser cut

    IKEA Skådis organizer tray with dividers

    Shorter open tray with dividers, hung on a Skadis board by two hooked side brackets that curve down to a low front.

Browse creations