IKEA Skådis hook

By Byteworks

IKEA Skådis pegboard hook: two 5 mm pegs on 40 mm centres, a 4 mm back plate and a 12 mm wide J-hook projecting 35 mm, with an optional second hook 20 mm lower.

Model
stlstepglb
Customize for free
IKEA Skådis hook, 3D printable model

Prompt that made this

IKEA Skadis pegboard hook. Two 5 × 5 mm pegs on 40 mm vertical centres that drop into Skadis slots, a 4 mm back plate, and a 12 mm-wide J-hook that projects 35 mm. Optional second hook 20 mm below the first. Fillets 1 mm. Prints without supports, pegs facing the bed.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hanging tools or bags on an IKEA Skådis pegboard

The pegs drop into two Skadis slots 40 mm apart and the catch lips lock behind the board. The load goes through the plate into the pegs. The J-hook stem carries the item and its lip stops it sliding off. Printed with the pegs on the bed, the 45 degree lip underside needs no supports.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • IKEA Skådis tray, 3D printable modelModelFork

    Community

    IKEA Skådis tray

    Open-top wall tray, 120x70x40 mm inside with 1.6 mm walls, two IKEA Skådis hook pegs on 40 mm centres, a 3x3 grid of 4 mm drain holes and an optional centre…

  • IKEA Skådis bin, 3D printable modelModelFork

    skadis bin

    IKEA Skadis bin

    A bin that hooks straight into your Skadis board with no clips. Three cells wide to start, 120 mm, with a curved front so you can reach in.

  • IKEA Skådis bin, laser-cut designLaserFork

    Laser cut

    IKEA Skådis bin

    An open tray on two hooked side brackets that hang on an IKEA Skadis board, with a floor, a front wall and a back wall.

  • IKEA Skådis shelf, 3D printable modelModelFork

    Community

    IKEA Skådis shelf

    IKEA Skådis pegboard shelf: 160x80x4 plate with two 5 mm mounting holes on 80 mm centres, a 16 mm rear riser, two drop-in J-pegs on 80 mm centres and an opti…

  • Skådis thread spools holder, laser-cut designLaserFork

    Laser cut

    Skådis thread spools holder

    Hang-on comb plates for an IKEA Skadis board; each plate has hooks that drop into the pegboard slots and sloped blade pegs with rounded corners that carry th…

  • IKEA Skådis cable hook, 3D printable modelModelFork

    Community

    IKEA Skådis cable hook

    IKEA Skådis pegboard cable hook with a 4 mm back plate, two drop-in pegs on 40 mm centres, and three 8 mm wide J-hooks in a vertical row 18 mm apart.

Browse creations