IKEA Skådis modem cradle for coda56

By Byteworks

IKEA Skådis hook bracket: a 5 mm back plate with eight drop-in hooks, a 173 mm wide open-top cradle for a Hitron CODA 56 modem, and two diagonal corner lips at the front end of the cradle, with a rear cable window, a shelf cable slot and an optional screw hole.

Model
stl3mfstepobjglbbrep
Customize for free
IKEA Skådis modem cradle for coda56, 3D printable model

Prompt that made this

A Skadis-compatible mounting bracket for a Hitron CODA 56 cable modem, a rectangular box-shaped device. The bracket should have a flat back plate with the standard Skadis hook pattern (the 5 mm thick plate with keyhole-style hooks on 25 mm pitch) so it hangs on a Skadis board. The front should have a shallow cradle or two side lips that hold the modem upright without covering its ventilation or ports. The modem is dimensions are: 51.5mm (H) x 171mm (W) x 171mm (D) - leave about 2 mm clearance on each side, so the cradle is about 173 mm wide and 42 mm high. Use 3 mm wall thickness, a 2 mm lip height on each side, and enough open space at the back and bottom for cables to pass. Keep the cradle open on the rear side for cable routing. Add an optional screw hole in the back plate for a wall or board fixing.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hanging a 171 mm Hitron CODA 56 cable modem on an IKEA Skådis pegboard

Eight drop-in hooks (two columns, two rows 25 mm apart) pass through the board slots and catch behind the 5 mm board, carrying the load into the board. The modem sits on the shelf between the two side walls. Diagonal corner lips in the bottom corners at the front end of the cradle hold the modem front. The plate window and shelf slot keep the rear and bottom open for cables.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • IKEA Skådis bin, 3D printable modelModelFork

    skadis bin

    IKEA Skadis bin

    A bin that hooks straight into your Skadis board with no clips. Three cells wide to start, 120 mm, with a curved front so you can reach in.

  • IKEA Skådis plier holder, 3D printable modelModelFork

    Community

    IKEA Skådis plier holder

    IKEA Skådis plier holder: a 100 mm bar with five 12x8 mm slots, 8 mm deep on 18 mm pitch, cut into its open front face, on a 4 mm back plate with two drop-in…

  • Skådis thread spools holder, laser-cut designLaserFork

    Laser cut

    Skådis thread spools holder

    Hang-on comb plates for an IKEA Skadis board; each plate has hooks that drop into the pegboard slots and sloped blade pegs with rounded corners that carry th…

  • IKEA Skådis headphone holder, 3D printable modelModelFork

    Community

    IKEA Skådis headphone holder

    IKEA Skådis headphone holder: two pegs on 40 mm centres, a 90 mm wide R55 U-cradle with 3 mm walls and 6 mm lips, and an optional side cable hook.

  • IKEA Skådis organizer tray with dividers, laser-cut designLaserFork

    Laser cut

    IKEA Skådis organizer tray with dividers

    Shorter open tray with dividers, hung on a Skadis board by two hooked side brackets that curve down to a low front.

  • IKEA Skådis spray can holder, 3D printable modelModelFork

    Community

    IKEA Skådis spray can holder

    IKEA Skådis spray-can holder, shown standing upright: a back plate as wide as the semicircles' straight side, with two J-pegs on the wall side. A semicircula…

Browse creations