Filament guide arm

By Byteworks

A 120x16x8 filament-guide arm with a 6 mm slot clamp at one end and a ball stud at the other, plus a separate 8 mm eyelet with a 2.4 mm bore that snaps onto the stud.

Model
stlstepglb
Customize for free
Filament guide arm, 3D printable model

Prompt that made this

Filament guide. A 120 × 16 × 8 mm arm with a 6 mm printer-frame clamp, and a separate 8 mm eyelet with a 2.4 mm bore that snaps on the arm end.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Guiding filament from a spool to a printer extruder, clamped to the frame

The two jaws grip a 6 mm frame member and a screw tightens them. The arm carries the filament line out to the eyelet. The eyelet's spherical socket presses onto the arm's ball stud and holds by snap fit. Filament runs through the 2.4 mm bore.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Mudular 21700 battery cell spacer tile, 3D printable modelModelFork

    Community

    Mudular 21700 battery cell spacer tile

    4x4 honeycomb 21700 cell holder tile with thick 5.5 mm walls and half-cell cradles on all four edges. Dovetail tabs on its right edge (three) and top edge (f…

  • 18650 holder 4x, 3D printable modelModelFork

    Community

    18650 holder 4x

    Four-cell 18650 holder with round open-top cradles between two slotted end walls and a bottom mounting tab with a 3 mm hole on each end.

  • Filament spool holder, 3D printable modelModelFork

    Community

    Filament spool holder

    Two open A-frame spool stands with 8.2 mm axle holes at 50 mm height, optional 608 bearing seats on the inner faces, and a separate 8 mm x 100 mm axle.

  • Bench dog, 3D printable modelModelFork

    Community

    Bench dog

    Round bench dog peg, 19.8 mm dia and 50 mm tall, with a 6 mm flange head whose top edge is chamfered, and a 2 mm spring slot cut up the side of the shaft.

  • PTFE tube clip, 3D printable modelModelFork

    Community

    PTFE tube clip

    Small PTFE tube clip block with a snap-in C-slot channel and a 6 mm screw hole.

  • Bambu poop chute bucket, 3D printable modelModelFork

    Community

    Bambu poop chute bucket

    Two-part waste chute: a hollow 70x40x35 chute with a 28x18 hooked inlet lip and dovetail rails underneath, plus a separate 90x70x80 bucket whose lid has matc…

Browse creations