Cable drag chain

By Byteworks

Five identical separate drag-chain links, 15x10 mm inside and 20 mm long, snap-pinned at the sides and posed in a gentle curve, with a top bar and an open top to drop cables in.

Model
stl3mfstepobjglbbrep
Customize for free
Cable drag chain, 3D printable model

Prompt that made this

Cable drag chain for a 3D printer or CNC. Five identical separate links, not grouped, each 20 mm long, 15 mm wide inside and 10 mm high inside, with snap-fit pivots so they join into a chain that bends one way only, and an opening top bar to drop cables in. Shown linked in a gentle curve.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Cable guide chain for a 3D printer or CNC axis

Each link is a rectangular tunnel for the cables. Round-headed pins on the outer walls snap into ear holes on the next link. The pivot is near the floor, so the chain bends with the top outside and stops when bent the other way. The roof is open except for a bar at one end, so cables drop in from the top.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Filament bag clip, 3D printable modelModelFork

    Community

    Filament bag clip

    Two-jaw filament-bag clip with interleaved hinge knuckles, a sealing rib and groove, and a separate 4 mm hinge pin.

  • Corner hand crank winch, 3D printable modelModelFork

    Community

    Corner hand crank winch

    Corner-mounted hand-crank winch: an L-flanged frame with a chamfered mounting corner, two bearing cheeks, a flanged spool fixed to an axle, a crank arm, and…

  • Jack saddle pad, 3D printable modelModelFork

    Community

    Jack saddle pad

    Bottle jack saddle pad: 55 mm disc with a raised locating ring on top, a 28 mm piston boss underneath and four drain holes on a 36 mm bolt circle.

  • Bevel gear pair 90, 3D printable modelModelFork

    Community

    Bevel gear pair 90

    Two meshing 90-degree bevel gears (16T and 32T, module 2) sharing a common apex at the origin, each with a 6 mm x 15 mm integral shaft stub.

  • C clamp, 3D printable modelModelFork

    Community

    C clamp

    C-clamp with a threaded frame arm, a screw whose cylindrical head now has a rounded top edge above the cross handle, and a separate clamping pad. The frame's…

  • Archimedean screw, 3D printable modelModelFork

    Community

    Archimedean screw

    Single-piece Archimedean screw: 12 mm core with a right-hand rectangular flight (36 mm major, 18 mm pitch) and 8 mm smooth journals on both ends.

Browse creations