3D print
Prompt that made this
Archimedean screw for dry goods or filament feed. Core shaft 12 mm diameter, 100 mm long. Rectangular flight thread: major diameter 36 mm, pitch 18 mm, flight thickness 3 mm, right-hand. Ends: 8 mm smooth journals, 10 mm long, on both ends. Single solid — use a real thread/flight, not stacked discs.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Archimedean screw conveyor for dry goods or filament feed
The shaft turns in end bearings on its two journals. The helical flight pushes material axially along the trough or tube, one pitch of 18 mm per revolution.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Bevel gear pair 90
Two meshing 90-degree bevel gears (16T and 32T, module 2) sharing a common apex at the origin, each with a 6 mm x 15 mm integral shaft stub.
ModelForkCommunity
Spring and centering cup
A closed-and-ground compression spring that sits on the floor of a separate cup with a centering boss inside the coil.
ModelForkCommunity
Planetary gearbox
Single-stage planetary gearbox: sun gear, three planets on a pinned carrier, and an internal ring gear, with a 4.67:1 reduction when the ring is fixed and th…
ModelForkCommunity
Jack saddle pad
Bottle jack saddle pad: 55 mm disc with a raised locating ring on top, a 28 mm piston boss underneath and four drain holes on a 36 mm bolt circle.
ModelForkCommunity
Dry box hygrometer mount
Dry-box hygrometer bezel: 50 mm ring, 8 mm deep, for a 45 mm face, with a 2 mm gasket flange and a separate knurled retaining nut.
