Bevel gear pair 90

By Byteworks

Two meshing 90-degree bevel gears (16T and 32T, module 2) sharing a common apex at the origin, each with a 6 mm x 15 mm integral shaft stub.

Model
stlstepglb
Customize for free
Bevel gear pair 90, 3D printable model

Prompt that made this

Right-angle bevel gear pair. Driving gear 16 teeth, driven gear 32 teeth, module 2 mm, 20° pressure angle, 90° shaft angle, 12 mm face width at the large end. Both gears share a common apex. Mount each on a short 6 mm shaft stub 15 mm long. No housing — just the two meshing bevels posed correctly so the teeth meet.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Right-angle speed-reducing drive between intersecting perpendicular shafts, 2:1 ratio

The 16T driving pinion on the X axis meshes with the 32T driven gear on the Z axis. The pitch cones are tangent along a shared line through the common apex, so the teeth engage at 90 degrees.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • C clamp, 3D printable modelModelFork

    Community

    C clamp

    C-clamp with a threaded frame arm, a screw whose cylindrical head now has a rounded top edge above the cross handle, and a separate clamping pad. The frame's…

  • Jack saddle pad, 3D printable modelModelFork

    Community

    Jack saddle pad

    Bottle jack saddle pad: 55 mm disc with a raised locating ring on top, a 28 mm piston boss underneath and four drain holes on a 36 mm bolt circle.

  • Corner hand crank winch, 3D printable modelModelFork

    Community

    Corner hand crank winch

    Corner-mounted hand-crank winch: an L-flanged frame with a chamfered mounting corner, two bearing cheeks, a flanged spool fixed to an axle, a crank arm, and…

  • Spring clamp, 3D printable modelModelFork

    Community

    Spring clamp

    Scissor-style spring clamp: two crossed jaw arms on a pivot pin, with a compression spring between the handles that pushes them apart and closes the jaws.

  • Cable drag chain, 3D printable modelModelFork

    Community

    Cable drag chain

    Five identical separate drag-chain links, 15x10 mm inside and 20 mm long, snap-pinned at the sides and posed in a gentle curve, with a top bar and an open to…

  • Filament bag clip, 3D printable modelModelFork

    Community

    Filament bag clip

    Two-jaw filament-bag clip with interleaved hinge knuckles, a sealing rib and groove, and a separate 4 mm hinge pin.

Browse creations