Spring clamp

By Byteworks

Scissor-style spring clamp: two crossed jaw arms on a pivot pin, with a compression spring between the handles that pushes them apart and closes the jaws.

Model
stlstepglb
Customize for free
Spring clamp, 3D printable model

Prompt that made this

Spring clamp

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hold sheet, paper or glued parts together with a squeeze-to-open clamp.

Squeezing the handles compresses the spring and opens the jaws about the pivot pin. Releasing them lets the spring push the handles apart and close the jaws on the work.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Planetary gearbox, 3D printable modelModelFork

    Community

    Planetary gearbox

    Single-stage planetary gearbox: sun gear, three planets on a pinned carrier, and an internal ring gear, with a 4.67:1 reduction when the ring is fixed and th…

  • Bevel gear pair 90, 3D printable modelModelFork

    Community

    Bevel gear pair 90

    Two meshing 90-degree bevel gears (16T and 32T, module 2) sharing a common apex at the origin, each with a 6 mm x 15 mm integral shaft stub.

  • Filament bag clip, 3D printable modelModelFork

    Community

    Filament bag clip

    Two-jaw filament-bag clip with interleaved hinge knuckles, a sealing rib and groove, and a separate 4 mm hinge pin.

  • Dry box hygrometer mount, 3D printable modelModelFork

    Community

    Dry box hygrometer mount

    Dry-box hygrometer bezel: 50 mm ring, 8 mm deep, for a 45 mm face, with a 2 mm gasket flange and a separate knurled retaining nut.

  • C clamp, 3D printable modelModelFork

    Community

    C clamp

    C-clamp with a threaded frame arm, a screw whose cylindrical head now has a rounded top edge above the cross handle, and a separate clamping pad. The frame's…

  • Jack saddle pad, 3D printable modelModelFork

    Community

    Jack saddle pad

    Bottle jack saddle pad: 55 mm disc with a raised locating ring on top, a 28 mm piston boss underneath and four drain holes on a 36 mm bolt circle.

Browse creations