3D print
Prompt that made this
Rubber pad replacement for a bottle jack saddle. Disc 55 mm diameter, 12 mm thick, with a concentric raised ring 40 mm OD and 4 mm tall to locate the jack cup. Underside has a 10 mm deep cylindrical boss 28 mm diameter that press-fits the jack piston. Four 8 mm drain holes through the pad on a 36 mm bolt circle. Single solid, no threads.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Replacement rubber saddle pad for a bottle jack
The raised ring locates the load cup on the pad, the underside boss press-fits the jack piston, and the four holes drain fluid from the cup
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Spring and centering cup
A closed-and-ground compression spring that sits on the floor of a separate cup with a centering boss inside the coil.
ModelForkCommunity
Cable drag chain
Five identical separate drag-chain links, 15x10 mm inside and 20 mm long, snap-pinned at the sides and posed in a gentle curve, with a top bar and an open to…
ModelForkCommunity
Archimedean screw
Single-piece Archimedean screw: 12 mm core with a right-hand rectangular flight (36 mm major, 18 mm pitch) and 8 mm smooth journals on both ends.
ModelForkCommunity
Spring clamp
Scissor-style spring clamp: two crossed jaw arms on a pivot pin, with a compression spring between the handles that pushes them apart and closes the jaws.
ModelForkCommunity
Planetary gearbox
Single-stage planetary gearbox: sun gear, three planets on a pinned carrier, and an internal ring gear, with a 4.67:1 reduction when the ring is fixed and th…
ModelForkCommunity
Dry box hygrometer mount
Dry-box hygrometer bezel: 50 mm ring, 8 mm deep, for a 45 mm face, with a 2 mm gasket flange and a separate knurled retaining nut.