Dry box hygrometer mount

By Byteworks

Dry-box hygrometer bezel: 50 mm ring, 8 mm deep, for a 45 mm face, with a 2 mm gasket flange and a separate knurled retaining nut.

Model
stlstepglb
Customize for free
Dry box hygrometer mount, 3D printable model

Prompt that made this

Dry-box hygrometer bezel. A 50 mm ring for a 45 mm round face, 8 mm deep, and a separate knurled nut. 2 mm gasket flange.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Mounting a 45 mm round hygrometer face in a dry-box wall

The flange seats on a gasket against the box wall, the face drops into the barrel against the flange lip, and the knurled nut threads onto the 50 mm barrel to clamp the wall from inside.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Planetary gearbox, 3D printable modelModelFork

    Community

    Planetary gearbox

    Single-stage planetary gearbox: sun gear, three planets on a pinned carrier, and an internal ring gear, with a 4.67:1 reduction when the ring is fixed and th…

  • Spring clamp, 3D printable modelModelFork

    Community

    Spring clamp

    Scissor-style spring clamp: two crossed jaw arms on a pivot pin, with a compression spring between the handles that pushes them apart and closes the jaws.

  • Jack saddle pad, 3D printable modelModelFork

    Community

    Jack saddle pad

    Bottle jack saddle pad: 55 mm disc with a raised locating ring on top, a 28 mm piston boss underneath and four drain holes on a 36 mm bolt circle.

  • Filament bag clip, 3D printable modelModelFork

    Community

    Filament bag clip

    Two-jaw filament-bag clip with interleaved hinge knuckles, a sealing rib and groove, and a separate 4 mm hinge pin.

  • C clamp, 3D printable modelModelFork

    Community

    C clamp

    C-clamp with a threaded frame arm, a screw whose cylindrical head now has a rounded top edge above the cross handle, and a separate clamping pad. The frame's…

  • Bevel gear pair 90, 3D printable modelModelFork

    Community

    Bevel gear pair 90

    Two meshing 90-degree bevel gears (16T and 32T, module 2) sharing a common apex at the origin, each with a 6 mm x 15 mm integral shaft stub.

Browse creations