Filament bag clip

By Byteworks

Two-jaw filament-bag clip with interleaved hinge knuckles, a sealing rib and groove, and a separate 4 mm hinge pin.

Model
stlstepglb
Customize for free
Filament bag clip, 3D printable model

Prompt that made this

Filament-bag clip. Two 90 × 20 × 8 mm jaws, sealing rib, 4 mm hinge pin. Wide enough for a refill bag.

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Resealing a partly used filament refill bag to keep out moisture

The jaws pivot on a 4 mm pin through five interleaved knuckles. Closed, the rib on the lower jaw presses the bag film into the groove of the upper jaw to seal across the 90 mm width.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Archimedean screw, 3D printable modelModelFork

    Community

    Archimedean screw

    Single-piece Archimedean screw: 12 mm core with a right-hand rectangular flight (36 mm major, 18 mm pitch) and 8 mm smooth journals on both ends.

  • Planetary gearbox, 3D printable modelModelFork

    Community

    Planetary gearbox

    Single-stage planetary gearbox: sun gear, three planets on a pinned carrier, and an internal ring gear, with a 4.67:1 reduction when the ring is fixed and th…

  • Spring clamp, 3D printable modelModelFork

    Community

    Spring clamp

    Scissor-style spring clamp: two crossed jaw arms on a pivot pin, with a compression spring between the handles that pushes them apart and closes the jaws.

  • Spring and centering cup, 3D printable modelModelFork

    Community

    Spring and centering cup

    A closed-and-ground compression spring that sits on the floor of a separate cup with a centering boss inside the coil.

  • C clamp, 3D printable modelModelFork

    Community

    C clamp

    C-clamp with a threaded frame arm, a screw whose cylindrical head now has a rounded top edge above the cross handle, and a separate clamping pad. The frame's…

  • Cable drag chain, 3D printable modelModelFork

    Community

    Cable drag chain

    Five identical separate drag-chain links, 15x10 mm inside and 20 mm long, snap-pinned at the sides and posed in a gentle curve, with a top bar and an open to…

Browse creations