Corner hand crank winch

By Byteworks

Corner-mounted hand-crank winch: an L-flanged frame with a chamfered mounting corner, two bearing cheeks, a flanged spool fixed to an axle, a crank arm, and a free-spinning handle.

Model
stlstepglb
Customize for free
Corner hand crank winch, 3D printable model

Prompt that made this

Corner hand-crank winch / spool

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hand winch for pulling rope or cable, bolted into the corner of two perpendicular walls.

Turning the handle drives the crank, which turns the axle and the keyed spool. The axle rides in clearance bores in two cheeks. The collar and crank arm stop axial float. Loads go from the cheeks to the base, then into the two wall flanges via screws.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Planetary gearbox, 3D printable modelModelFork

    Community

    Planetary gearbox

    Single-stage planetary gearbox: sun gear, three planets on a pinned carrier, and an internal ring gear, with a 4.67:1 reduction when the ring is fixed and th…

  • Archimedean screw, 3D printable modelModelFork

    Community

    Archimedean screw

    Single-piece Archimedean screw: 12 mm core with a right-hand rectangular flight (36 mm major, 18 mm pitch) and 8 mm smooth journals on both ends.

  • Bevel gear pair 90, 3D printable modelModelFork

    Community

    Bevel gear pair 90

    Two meshing 90-degree bevel gears (16T and 32T, module 2) sharing a common apex at the origin, each with a 6 mm x 15 mm integral shaft stub.

  • Corner clamp, 3D printable modelModelFork

    Community

    Corner clamp

    90° L-frame corner clamp, 80x80x20 with a 40 mm opening, a printed M10 screw through the jaw and a ball-swivel pad on the tip.

  • C clamp, 3D printable modelModelFork

    Community

    C clamp

    C-clamp with a threaded frame arm, a screw whose cylindrical head now has a rounded top edge above the cross handle, and a separate clamping pad. The frame's…

  • Dry box hygrometer mount, 3D printable modelModelFork

    Community

    Dry box hygrometer mount

    Dry-box hygrometer bezel: 50 mm ring, 8 mm deep, for a 45 mm face, with a 2 mm gasket flange and a separate knurled retaining nut.

Browse creations