3D print
Prompt that made this
Wall-mounted razor holder for the shower. A 70 × 60 mm back plate, 5 mm thick, with two 4 mm screw holes. A shelf 45 mm deep with a 14 mm wide slot from the front edge so a razor handle hangs head-up, drain holes in the shelf, and a 6 mm lip at the front.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Hanging a razor in a shower, wall mounted with two screws
The plate screws to the wall. The shelf carries the razor, with the handle hanging down through the front slot and the head resting on the shelf. Water drains through the shelf holes and the lip keeps things on the shelf.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
LaserForklaser cut organizer
Laser cut desk organizer
Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkcnc box
CNC box with lid
CNC box with lid as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Door stop wedge
A 130 x 45 mm door stop wedge rising from 3 mm to 28 mm, with triangular grip ridges on the slope, a lanyard hole near the tall end and a slightly dished und…
LaserForkLaser cut
Glueless desk organizer
Open-top desk tray with finger-jointed walls and two crossing dividers; every joint is a mechanical finger, tab or cross-slot, so it assembles without glue.
CNCForkCNC cut
Workstation desk
A wide flat-pack desk on two tapered, splayed inverted-U leg frames with the desk top resting between them, an upper bracket pressed against the underside of…
LaserForkLaser cut
Round lantern
A two-storey round lantern with a double candle door (two leaves, each hinged on top and bottom pins at its outer side), a diamond cross-hatch lattice with s…