3D print
Prompt that made this
Remote caddy, 160 × 70 × 50 mm, three 48 × 28 mm slots and one 18 × 18 mm slot for a streaming stick remote. 1.6 mm walls.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Holding streaming stick remotes upright on a desk or shelf
Each remote drops into a blind slot sized to its footprint, and the slot walls hold it upright. A front finger notch on each large slot lets the remote be pinched and lifted out. The slots are spread evenly along the 160 mm length.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
LaserForklaser cut organizer
Laser cut desk organizer
Laser cut desk organizer as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Switch stand
Low desk kickstand block with a 12 mm slot leaning the console at 70 degrees and a cable notch out the back.
CNCForkCNC cut
Chair - Pointy
Flat-pack side chair with two angular side frames (forward-splayed tapered front legs, a gabled apron and a single raked back post), a seat panel and two che…
LaserForklaser cut lamp
Laser cut lamp
Laser cut lamp as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Floating shelf bracket
L-shaped floating shelf bracket with a triangular gusset, two countersunk wall screw holes and two 4 mm holes in the arm.
CNCForkCNC cut
Workstation desk
A wide flat-pack desk on two tapered, splayed inverted-U leg frames with the desk top resting between them, an upper bracket pressed against the underside of…