Raspberry Pi 4 snap fit case

By Byteworks

Raspberry Pi 4 case with standoffs, port cutouts and a snap-fit lid; the base and lid have rounded vertical corners and softened top and bottom outer edges, with the lid's edge softness limited to its 3 mm thickness. The lid carries the uploaded logo engraved inside a ring, and 'Made with Voloom' is engraved along the back side, which has no ports.

Model
stl3mfstepobjglbbrep
Customize for free
Raspberry Pi 4 snap fit case, 3D printable model

Prompt that made this

RPI 4 case with snap lid with this logo engraved on it

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Enclosure for a Raspberry Pi 4 Model B (85x56 mm board)

The Pi sits on four standoffs with pins through its mounting holes; port cutouts line up with the connectors; the lid's inner lip drops into the base and its bumps click into windows in the walls.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Project box, 3D printable modelModelFork

    Community

    Project box

    Project enclosure sized for a standard full-size breadboard (165x55 mm) with 4 screw posts, an optional end port cutout and an optional separate screw-down l…

  • Raspberry pi 5 case, 3D printable modelModelFork

    Community

    Raspberry pi 5 case

    Two-part Raspberry Pi 5 case sized to the 85x56 mm board: a deep, hollow, rounded-corner base with a 2.5 mm floor, four tubular standoffs, clearly cut port o…

  • Arduino nano case, 3D printable modelModelFork

    Community

    Arduino nano case

    Two-part Arduino Nano case shown assembled: the snap-on lid sits closed on the base with its lip inside the cavity. The base has a USB end cut-out and side s…

  • Heltec v3 meshtastic case, 3D printable modelModelFork

    Community

    Heltec v3 meshtastic case

    Two-part Heltec WiFi LoRa 32 V3 Meshtastic case shown assembled, sized to the real 50.8 x 25.4 mm board. Posts sit between the two pin-header rows, the USB-C…

  • Raspberry Pi 5 snap fit case, 3D printable modelModelFork

    Community

    Raspberry Pi 5 snap fit case

    Two parts: a base with standoffs and port cutouts, and a snap-fit lid with an engraved ring and logo. The back wall carries engraved text.

  • Raspberry Pi Zero case, 3D printable modelModelFork

    Community

    Raspberry Pi Zero case

    Two-part Raspberry Pi Zero case shown assembled: the lid is flipped and seated on the open-top base, with its rim inside the cavity and its snap bumps in the…

Browse creations