3D print

Low poly hanging planter

By Byteworks

Sleek faceted hanging planter: one tapered hexagonal body with a flush-topped open cavity, three small flat hex tabs for cords, and a drain hole.

Model

stl step glb

Customize for free

Low poly hanging planter, 3D printable model

Prompt that made this

Hanging plant pot

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Hanging planter hung from three cords or chains

Soil is held in the tapered cavity. Three rim lugs spread the hanging load evenly around the rim. The base hole drains excess water.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

LaserFork
Laser cut
Round lantern
A two-storey round lantern with a double candle door (two leaves, each hinged on top and bottom pins at its outer side), a diamond cross-hatch lattice with s…
ModelFork
Community
Switch stand
Low desk kickstand block with a 12 mm slot leaning the console at 70 degrees and a cable notch out the back.
CNCFork
CNC cut
Chair - Pointy
Flat-pack side chair with two angular side frames (forward-splayed tapered front legs, a gabled apron and a single raked back post), a seat panel and two che…
LaserFork
tea light holder
Laser cut tea light holder
Laser cut tea light holder as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelFork
Community
Toilet paper holder
Wall-mounted toilet paper holder: 90x60x6 plate with two countersunk screw holes, a 150 mm long 25 mm diameter arm, and a raised lip at the free tip.
CNCFork
CNC cut
Slot together side table
A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…