3D print
Prompt that made this
Cable comb, 80 × 12 × 8 mm, eight 5.2 mm slots 6 mm deep, 8 mm pitch. Optional 3.5 mm mounting hole at each end.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Cable management comb for holding eight parallel cables or wires apart on a bench or panel.
Cables drop into the open-top slots and are held apart at 8 mm pitch. Screws through the end holes fasten the comb to a surface.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Broom mop holder
Wall-mounted broom and mop holder: a 70x50x6 back plate with two 4 mm screw holes and a 30 mm tall C-clip with a front opening and flexible arms that grips h…
CNCForkCNC cut
Drawer cabinet
Finger-jointed carcass with a back and two tabbed shelves, holding three sliding finger-jointed drawers with hand slots.
LaserForktea light holder
Laser cut tea light holder
Laser cut tea light holder as a parametric cut file. Set the stock and size, then download the SVG or DXF.
ModelForkCommunity
Drawer organizer set
Three separate open drawer trays (160x80, 160x40, 80x80 mm), 1.2 mm walls, 35 mm tall, each with a 1 mm stacking rim, laid out side by side with a small gap.
CNCForkCNC cut
Slot together side table
A 400 × 400 mm side table, 450 mm tall, cut from 18 mm ply: two splayed A-frame end panels with arched feet, tabbed into the top, and a lower shelf that lock…
LaserForkplasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.