3D print
Prompt that made this
Drawer organizer set. Three open trays, 1.2 mm walls, 35 mm tall: 160 × 80 mm, 160 × 40 mm, and 80 × 80 mm. Stacking rim 1 mm so they tile. No Gridfinity base — this is the Google landing for people who do not know Gridfinity yet.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Drawer organizer for small items, printable without any Gridfinity baseplate
Each tray is an open-top box with a 1.2 mm wall and floor. A 1 mm stacking rim on the wall top, inset by half a wall, lets trays stack or sit together. The footprints tile a drawer as a 160x120 block plus an 80x80 block.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
CNCForkCNC cut
Drawer cabinet
Finger-jointed carcass with a back and two tabbed shelves, holding three sliding finger-jointed drawers with hand slots.
LaserForkLaser cut
Pitched roof birdhouse
Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…
ModelForkCommunity
Broom mop holder
Wall-mounted broom and mop holder: a 70x50x6 back plate with two 4 mm screw holes and a 30 mm tall C-clip with a front opening and flexible arms that grips h…
LaserForkplasma cut sign
Plasma cut name sign
Plasma cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
