3D print
Prompt that made this
Ashtray
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Desktop or table ashtray for cigarettes
Ash and butts collect in the bowl. Cigarettes rest in the rim scoops with the lit end over the bowl, and the thick floor keeps embers away from the table.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Self draining soap dish
A 120x80x18 mm soap dish with a 4° floor sloping to an open front, six ribs, 3 mm side and back walls, four 3 mm feet at the corners, and a separate drip tra…
LaserForkLaser cut
Pitched roof birdhouse
Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…
CNCForkCNC cut
Workstation desk
A wide flat-pack desk on two tapered, splayed inverted-U leg frames with the desk top resting between them, an upper bracket pressed against the underside of…
ModelForkCommunity
Coffee pod holder
Rectangular coffee-pod tray with a 4 x 3 grid of round 38 mm pockets, 16 mm deep, separated by 1.6 mm walls, on a 1.6 mm floor.
LaserForkhouse number sign
House number sign
House number sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.
CNCForkCNC cut
Chair - Rounded
A taller, sleeker flat-pack chair with tapered side frames and a backrest reclined at an angle: the front legs splay forward and narrow toward the foot, and…