Arduino uno snap case

By Byteworks

Two-piece Arduino UNO enclosure shown assembled: a base with board standoffs, USB and DC jack cutouts, snap windows and a raised text label on the right side, with the solid cover flipped and seated on top of the base. Its four cantilever snap hooks reach down into the case, and the embossed round logo disc faces up.

Model
stl3mfstepobjglbbrep
Customize for free
Arduino uno snap case, 3D printable model

Prompt that made this

Arduino UNO snap case with snap cover

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Protective enclosure for an Arduino UNO R3 (68.6 x 53.4 mm board) that closes tool-free.

The board sits on four screw standoffs in the base. USB-B and DC jack openings on the left wall line up with the connectors. The cover sits on top of the base, and its four flexible hooks have ramped bumps that deflect into rectangular windows in the long walls and catch the window edge, holding the cover on without screws. A raised label on the right wall and a large centered vertical logo on an embossed disc on the cover's outer (top) face identify the case.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • Raspberry Pi 4 snap fit case, 3D printable modelModelFork

    Community

    Raspberry Pi 4 snap fit case

    Two parts: a base with standoffs and port cutouts, and a snap-fit lid with a logo engraved in a ring.

  • Raspberry pi 5 case, 3D printable modelModelFork

    Community

    Raspberry pi 5 case

    Two-part Raspberry Pi 5 case sized to the 85x56 mm board: a deep, hollow, rounded-corner base with a 2.5 mm floor, four tubular standoffs, clearly cut port o…

  • Raspberry Pi Zero case, 3D printable modelModelFork

    Community

    Raspberry Pi Zero case

    Two-part Raspberry Pi Zero case shown assembled: the lid is flipped and seated on the open-top base, with its rim inside the cavity and its snap bumps in the…

  • Arduino nano case, 3D printable modelModelFork

    Community

    Arduino nano case

    Two-part Arduino Nano case shown assembled: the snap-on lid sits closed on the base with its lip inside the cavity. The base has a USB end cut-out and side s…

  • Project box, 3D printable modelModelFork

    Community

    Project box

    Project enclosure sized for a standard full-size breadboard (165x55 mm) with 4 screw posts, an optional end port cutout and an optional separate screw-down l…

  • ESP32 project box, 3D printable modelModelFork

    Community

    ESP32 project box

    ESP32 DevKit project box with a USB-C cutout, four standoffs, optional cable gland holes on one short wall and a separate snap-fit lid.

Browse creations