SNES cartridge tray

By Byteworks

One-piece SNES cartridge stand with an editable 'cartridges' count: a floor, a front panel leaning back at the same tilt as the fins, equal-height fins leaning back, and end walls with a level top that no longer rises toward the back. The controller logo is a separate raised part on the front panel.

Model
stl3mfstepobjglbbrep
Customize for free
SNES cartridge tray, 3D printable model

Prompt that made this

A stackable storage tray for Super Nintendo (SNES) game cartridges. Each tray holds several cartridges lying flat in a row, with a pocket sized for a cartridge of about 102 x 66 x 13 mm plus about 0.5 mm clearance per side, and a finger notch on one edge for easy removal. The trays stack vertically and lock together with matching tabs on the top and sockets on the bottom so the stack stays aligned and does not slide. Include a flat base plate so the bottom tray stands stable on a desk or shelf. Use sensible defaults for wall thickness (about 2.5 mm), tray height (about 16 mm) and number of cartridges per tray (4).

Open the model

Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.

Why this one

Desk or shelf display of a chosen number of SNES game cartridges on a single level, all at the same height.

Cartridges lean back at an angle in parallel slots between fins of equal height, the front panel leaning at the same angle. Each cartridge is staggered back from the one in front, so its top is level and the upper part of its label shows above the fin in front. The floor and end walls stop the cartridges sliding and make the stand body one solid. A separate logo plate sits on the front panel for decoration.

How to print

Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.

More to make

  • A stool, CNC designCNCFork

    CNC cut

    A stool

    Round plywood stool: a disc seat held by two interlocking leg frames whose legs splay outward, tabbed up through the seat.

  • Cross leg stool, laser-cut designLaserFork

    Laser cut

    Cross leg stool

    Round stool with two cross-slotted X legs, a ring at the feet tying them together, and a round seat tabbed into the leg tops.

  • Mug, 3D printable modelModelFork

    Community

    Mug

    Cylindrical mug with a hollow cavity, a thick floor and a rounded C-shaped side handle.

  • Chair - Pointy, CNC designCNCFork

    CNC cut

    Chair - Pointy

    Flat-pack side chair with two angular side frames (forward-splayed tapered front legs, a gabled apron and a single raked back post), a seat panel and two che…

  • Finger jointed desktop organizer, laser-cut designLaserFork

    Laser cut

    Finger jointed desktop organizer

    Finger-jointed desktop organizer with a front-open carcass, two tabbed shelves and three open-top drawers, each with a finger-pull slot.

  • Coffee pod holder, 3D printable modelModelFork

    Community

    Coffee pod holder

    Rectangular coffee-pod tray with a 4 x 3 grid of round 38 mm pockets, 16 mm deep, separated by 1.6 mm walls, on a 1.6 mm floor.

Browse creations