Laser cut two drawer cabinet

By Byteworks

A small open-front carcass with a middle shelf and two finger-jointed box drawers stacked one above the other.

Laser
svg
Customize for free
Laser cut two drawer cabinet, laser-cut design

Cut settings: 6 mm birch plywood · 600 × 400 · 2 sheets · 10.4 m of cut

Prompt that made this

2 joined box drawers with finger joints

Open the model

Made in Voloom from the prompt under the model. Download the cut sheets as they are, or fork a copy to change the material thickness and every size on the right — the joints re-cut to fit, without spending credits.

Make it fit your stock

Measure your sheet first. In the editor, set the thickness to match and every slot and tab re-cuts to fit. Change the sheet size and the parts nest again. Neither spends credits.

Download an SVG per sheet and send it to your laser cutter.

More to make

  • House model, laser-cut designLaserFork

    Laser cut

    House model

    Flat-pack house with a tall gabled main block, a lower gabled side wing, an arched six-pane window, ventilation holes, engraved doors and a four-panel chimne…

  • House number sign, laser-cut designLaserFork

    house number sign

    House number sign

    House number sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • Floating wall shelf, laser-cut designLaserFork

    laser cut shelf

    Laser cut wall shelf

    Laser cut wall shelf as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • Pitched roof birdhouse, laser-cut designLaserFork

    Laser cut

    Pitched roof birdhouse

    Finger-jointed birdhouse with a front-overhanging pitched roof, a 32 mm entrance hole, a flat perch with a rounded end, and a tall back plate with a hanging…

  • Olivia name sign, laser-cut designLaserFork

    name sign

    Laser cut name sign

    Laser cut name sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.

  • LaserFork

    wedding sign

    Mr & Mrs wedding sign

    Mr & Mrs wedding sign as a parametric cut file. Set the stock and size, then download the SVG or DXF.