3D print
Prompt that made this
Scotch yoke. Four separate parts, not grouped: a frame, a crank disc with one pin, a slotted yoke the pin rides in, and a rod on the yoke.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Converting rotary motion into straight-line reciprocation in a printable demo mechanism.
The crank disc turns on the frame axle. Its pin rides in the yoke's vertical slot and drives the yoke along X between the two rails. The rod is seated in the yoke's right face and slides through the frame's bearing block. The stroke is 2 times the crank radius.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkmultiboard allen key holder
Multiboard hex key holder
Multiboard hex key holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Rover chassis
3D-printable four-motor rover chassis: a 180x120x4 plate with four half-saddles at the corners, BTS7960 and ESP32 standoff pads, a 150x60 battery tray with s…
ModelForksteam frame controller stand
Steam Frame controller stand
Steam Frame controller stand as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Modular 21700 battery cell spacer tile
Four staggered-honeycomb 21700 cell holder tiles laid out in a 2x2 lattice, each tile now 4 columns of 5 cells, with dovetail tabs on its right and top edges…
ModelForkopengrid pliers holder
openGrid pliers holder
openGrid pliers holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Sink sponge holder
Open-top sink sponge holder with 2 mm walls, a floor that slopes toward the front, five 5 mm drain slots, and two blind 30 mm suction-cup recesses on the bac…