3D print
Prompt that made this
Hex bolt, nut and washer. Three separate parts, not grouped: an M10 × 40 hex bolt, a washer under the head, and a hex nut on the thread.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Standard M10 fastener set for clamping plates together
The bolt head bears on the washer, which spreads the load onto the clamped plate. The nut threads onto the bolt's male thread and clamps from the far side.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Mouse bungee
Weighted disc base with a coin pocket underneath, a vertical arm and a C-clip on top that snaps a mouse cable in.
ModelForkmultiboard bit holder
Multiboard bit holder
Multiboard bit holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Modular 21700 battery cell spacer tile
Four staggered-honeycomb 21700 cell holder tiles laid out in a 2x2 lattice, each tile now 4 columns of 5 cells, with dovetail tabs on its right and top edges…
ModelForkstarlink mini roof mount
Starlink Mini roof rack mount
Starlink Mini roof rack mount as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Multiboard spray can holder
Multiboard spray can holder: 3x2 cell back with Multiconnect keyhole slots, a collared 68 mm hole at the bottom edge, and a drop arm carrying a closed base w…
ModelForkstarlink mini pole mount
Starlink Mini pole mount
Starlink Mini pole mount as a parametric solid. Change a size, then download the STL.