3D print
Prompt that made this
OpenGrid bin with openConnect slots on the back, 3 cells wide, 2 cells tall, 50 mm deep, 1.6 mm walls, front wall full height, no dividers. Put cells_x, cells_z, depth, front (the front wall height in mm), dividers and a multiconnect switch (0 openConnect, 1 Multiconnect slots, wired as connector: "$multiconnect") on parameters.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Storage bin hanging on an openGrid wall
Open-top bin with a slotted back that hangs on openGrid connectors; the full-height front wall retains contents.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForksteam frame wall mount
Steam Frame wall mount
Steam Frame wall mount as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
IKEA Skådis cable hook
IKEA Skådis pegboard cable hook with a 4 mm back plate, two drop-in pegs on 40 mm centres, and three 8 mm wide J-hooks in a vertical row 18 mm apart.
ModelForkmultiboard tape holder
Multiboard tape holder
Multiboard tape holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Universal joint
Three separate parts: two yokes at 90° to each other, and a cross-shaped spider seated in the yoke forks. Shafts 16 mm, span about 70 mm.
ModelForkmultiboard drill holder
Multiboard drill holder
Multiboard drill holder as a parametric solid. Change a size, then download the STL.
