3D print
Prompt that made this
Multiboard bin with Multiconnect slots on the back, 3 cells wide, 2 cells tall, 60 mm deep, 1.6 mm walls, front wall full height, no dividers. Put cells_x, cells_z, depth, front (the front wall height in mm) and dividers on parameters.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Open storage bin that hangs on a Multiboard wall
The slotted back slides down onto Multiconnect heads in the board and carries the load. The open-top bin holds small items.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkopengrid cup
openGrid pen cup
openGrid pen cup as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Pixel 7 case
Snap-on phone case for a Pixel 7 with a front retaining lip, a shallow back recess framed by a raised perimeter rim, a camera bar window, side button slots a…
ModelForkCommunity
Mudular 21700 battery cell spacer tile
4x4 honeycomb 21700 cell holder tile with thick 5.5 mm walls and half-cell cradles on all four edges. Dovetail tabs on its right edge (three) and top edge (f…
ModelForkmultiboard cable management
Multiboard cable channel
Multiboard cable channel as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Magnetic parts tray
Open parts tray 120x80x15 with 2 mm walls and 8 mm rounded corners, with optional four 20 mm magnet pockets under the floor.
