3D print
Prompt that made this
Geneva mechanism. Three separate parts, not grouped: a six-slot star wheel 55 mm across, a drive disc with its pin in one slot, and a base plate under both.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Demonstration or intermittent-motion mechanism that indexes an output 60 degrees per input turn
The drive pin enters a wheel slot, rotates the wheel 60 degrees, then leaves. The lock disc sits in a concave wheel arc and holds the wheel still between indexes.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkopenconnect connector
openConnect connector
openConnect connector as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
IKEA Skådis phone holder
IKEA Skådis pegboard phone holder with two hook pegs on 40 mm centres and a tilted 78 x 18 mm phone slot at 65 degrees with a 6 mm front lip and an 8 mm cabl…
ModelForkopengrid bit holder
openGrid bit holder
openGrid bit holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Pixel 7 case
Snap-on phone case for a Pixel 7 with a front retaining lip, a shallow back recess framed by a raised perimeter rim, a camera bar window, side button slots a…
ModelForkmultiboard allen key holder
Multiboard hex key holder
Multiboard hex key holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Multiboard spray can holder
Multiboard spray can holder: 3x2 cell back with Multiconnect keyhole slots, a collared 68 mm hole at the bottom edge, and a drop arm carrying a closed base w…