3D print
Prompt that made this
C-clamp. Three separate parts, not grouped: a 70 mm C-frame, a 10 mm screw through the top pad, and a swivel foot on the screw tip.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Holding workpieces to a bench or to each other by squeezing them between the fixed jaw and the screw foot.
The load runs from the screw through the threaded top pad and arm, around the spine, and into the bottom jaw. Turning the screw drives the foot toward the fixed jaw. The foot is a loose cup on the screw tip so it can swivel.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Gridfinity baseplate for IKEA Alex
Two separate 3x6-cell Gridfinity baseplate tiles, side by side, that together fill a 252x252 mm Alex drawer, with optional magnet pockets.
ModelForkopengrid bit holder
openGrid bit holder
openGrid bit holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity nozzle holder
1x2 Gridfinity block with two rows of six M6 nozzle pockets, a central 10 mm wrench trough and base magnet pockets.
ModelForkopengrid phone holder
openGrid phone holder
openGrid phone holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Herringbone gear pair
Meshed. Two separate parts: a 15-tooth pinion and a 30-tooth gear, module 1.5, 14 mm face.
ModelForkstarlink mini wall mount
Starlink Mini wall mount
Starlink Mini wall mount as a parametric solid. Change a size, then download the STL.