3D print
Prompt that made this
Slider-crank. Four separate parts, not grouped: a frame, a crank disc, a connecting rod, and a piston on the rod. Assembled so the linkage reads at a glance.
Made in Voloom from the prompt under the model. Sign in to download the STL, or fork it so every size on the right becomes editable — without spending credits.
Why this one
Teaching model or desk demo of a slider-crank mechanism
The crank disc rotates on the frame axle; its crank pin drives the connecting rod, whose other end pivots on the piston pin; the piston is constrained by the frame rails to slide along X.
How to print
Download the STL, 3MF, or STEP and slice it. Fork the design to change a size before you print.
More to make
ModelForkCommunity
Gridfinity battery tray
2x3 Gridfinity battery tray with twelve 14.8 mm AA pockets in a 4x3 grid, raised + and - marks, magnet holes under the base, and a separate insert with eight…
ModelForkopengrid screwdriver holder
openGrid screwdriver holder
openGrid screwdriver holder as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Hydraulic cylinder
Four separate parts: a 30 mm bore barrel 70 mm long, a piston inside, a 12 mm rod sticking out, and a cap on the rod end.
ModelForkmultiboard gridfinity
Multiboard Gridfinity shelf
Multiboard Gridfinity shelf as a parametric solid. Change a size, then download the STL.
ModelForkCommunity
Gridfinity hex key holder
2x1 Gridfinity bin with seven hex sockets for 1.5 to 6 mm keys (0.3 mm oversize, 18 mm deep), raised size labels and a magnet base.
ModelForkmultiboard bit holder
Multiboard bit holder
Multiboard bit holder as a parametric solid. Change a size, then download the STL.