cnc cutting board file
CNC cutting board generator
Make a cutting board for your CNC router: set the size, the stock, the corners and the juice groove, preview it, and download the DXF or SVG. Free, no install.
Need more than sizes?
Your name engraved in a corner, pockets for rubber feet, a different hand hole. Describe it, and Voloom builds it from your sizes.
Good to know
The groove and the hand hole are separate paths in the file, so you can give each its own depth and bit in your CAM. Hardwood like maple or walnut, 18 to 25 mm thick, is the usual stock.
How it works
- 1Set the sizes. The cnc cutting board rebuilds when you let go of a slider.
- 2Turn it in the preview and check the overall size.
- 3Download the DXF or SVG, one file per part, and slice it.
What you can change
Length: 300 to 560 mm.
Width: 200 to 380 mm.
Stock thickness: 12 to 40 mm.
Corner radius: 15 to 60 mm.
Groove from the edge: 10 to 40 mm.
Groove width: 10 to 20 mm.
Groove depth: 2 to 12 mm.
When sizes are not enough
This is a real parametric model, built on a CAD kernel, not a mesh stretched to fit. Walls stay the thickness you set when the cnc cutting board grows.
For anything the sliders do not cover, such as ports in the right places, mounting holes, text or a logo, describe it to Voloom. It starts from these sizes and builds the part from scratch.
About STL
STL (Stereolithography). The default 3D printing format since 1987: a bare list of triangles. Every slicer reads it, but it has no units, no color, and no parts.
Units: None in the file. Slicers read the numbers as millimeters. Up axis: Z. Opens in Bambu Studio, PrusaSlicer, Cura, OrcaSlicer, and Blender.
Questions
- Is the cnc cutting board generator free?
- Yes. You get 3 runs a month without an account. Sign in with your email, free, and there is no limit.
- Do I need an account?
- No. Change the sizes and preview as much as you like. Downloads count toward the free runs; signing in, free, removes the limit.
- Can I add cutouts, holes or a logo to the cnc cutting board?
- Yes. Use “Describe the rest” under the preview. Voloom takes your sizes into a prompt, you add what you need in plain words, and it builds a new parametric model you can keep editing.
- Can I get a STEP file?
- Yes, from the editor. Open your cnc cutting board in Voloom and download STEP on the Maker plan, for Fusion, SolidWorks or FreeCAD.
Related tools
All tools- Laser cut box generatorMake a finger-jointed box for your laser cutter: set the size, stock and finger width, preview it assembled, then download the SVG or DXF free.
- Spur gear generatorMake a 3D printable spur gear: set the teeth, module, face width, bore and hub, then download the STL free. Involute teeth, D bore and set screw.
- Helical gear generatorMake a meshing pair of 3D printable helical gears: set the teeth, helix angle, module, face width and bore, then download the STL free.
- Rack and pinion generatorMake a 3D printable rack and pinion: set the pinion teeth, rack length, module, face width and bore, then download the STL free.
- Bevel gear generatorMake a meshing pair of 3D printable bevel gears at 90°: set the teeth on each, module, face width and bore, then download the STL free.
- Worm gear generatorMake a 3D printable worm and worm wheel: set the starts, wheel teeth, worm length, module and bore, then download the STL free.
- Project box generatorMake a 3D printable project box for your board. Set the board size, depth and walls, add a lid and a cable cutout, and download the STL. Free, no install.
- Electronics enclosure generatorMake a 3D printable electronics enclosure around your board: set its size and mounting holes, vents and a cable port, then download the STL free.